What is the workflow of punching machine?
From：
Dongguan Anze Automation Equipment Co., Ltd.
Post date：
2019-04-23
1. The punching machine is a fixture made according to the size of the processing, the number of the processing holes, the size of the processing holes and the location data of the processing holes. Tighten clamp and automatic turntable.
2. Set up the processing data in the control computer.
3. Fix the material to be processed on the automatic turntable.
4. Start the machine. According to the computer instructions and processing data, the machine can complete the processing procedures of drilling, drilling, milling, through-hole, blind-hole, multi-hole and high-low-hole at one time.
5. After a hole is processed, the automatic drilling disc will rotate a certain angle according to the set procedure, align the position of the next hole to the processing head, and start processing again. When the whole turntable is processed, the processing flow will be completed in one time. Remove the processed material. Reloading.
6. In the process of processing, the machine will alarm immediately when there is material jamming and material shortage, and stop working and wait for processing.
7. In the process of processing, when the tool head is not sharp, the machine will immediately alarm and notify the replacement tool.